Usb Sc09 Fx Driver Download
CLICK HERE >>> https://urloso.com/2tytkZ
How to Install and Use the USB-SC09-FX Cable for Mitsubishi PLCs
The USB-SC09-FX cable is a programming and communication cable that can be used to connect a Mitsubishi PLC (programmable logic controller) from the FX0N, FX1N, FX2N, FX0S, FX1S, FX3U, or FX3G series to a computer for programming and communication purposes. It uses a USB connection and requires a device driver to be installed on the computer to function properly. This driver is known as the USB SC09-FX driver. Once installed, the driver allows the computer to communicate with the PLC using the Mitsubishi GX Works2 software.
In this article, we will show you how to install and use the USB-SC09-FX cable for Mitsubishi PLCs. We will also explain the difference between the USB-SC09-FX cable and the USB-SC09 cable, and provide some links to download the drivers and software.
Difference between USB-SC09-FX and USB-SC09
The USB-SC09-FX cable is only used for the Mitsubishi FX series PLCs, while the USB-SC09 cable is commonly used for both the Mitsubishi FX series and A series PLCs. The USB-SC09-FX cable has a round 8-pin RS422 connector that plugs into the PLC, while the USB-SC09 cable has a round 25-pin RS232 connector that plugs into the PLC. The USB-SC09-FX cable also has a different pinout than the USB-SC09 cable.
USB-SC09-FX Pinout
The USB-SC09-FX cable has a round 8-pin RS422 connector that plugs into the PLC. The pinout of this connector is as follows:
PinSignal
1GND
2RXD+
3RXD-
4TXD+
5TXD-
6SG
7N.C.
8N.C.
USB-SC09-FX Driver Download and Installation
To use the USB-SC09-FX cable, you need to download and install the USB SC09-FX driver on your computer. This driver supports Windows 7 10 64bit operating systems. You can download the driver from this link: [^1^]
To install the driver, follow these steps:
Insert the USB port of the cable into your computer's USB port.
Open the device manager of your computer and look for an unknown device under "Other devices". This is your cable.
Right-click on the unknown device and select "Update driver software".
Select "Browse my computer for driver software".
Select "Let me pick from a list of device drivers on my computer".
Select "Ports (COM & LPT)" as the device type.
Select "Have Disk" and browse to the folder where you extracted the driver files.
Select "USB SC09-FX" as the model and click "Next".
Follow the instructions on the screen to complete the installation.
The device manager should now show your cable as "USB SC09-FX (COMx)" under "Ports (COM & LPT)", where x is the assigned COM port number.
Using the USB-SC09-FX Cable with GX Works2 Software
To use the USB-SC09-FX cable with GX Works2 software, you need to configure the communication settings in GX Works2. GX Works2 is a software that can be used to program and monitor Mitsubishi PLCs. You can download GX 061ffe29dd